Curved Lug Alligator Patterned Leather Watch Strap / Clasp / 19mm 20mm 21mm 22mm

Note: Changed to clasp only – June 2024

Curved lug is suitable for watches that need curved lug watch bands. Some manufactures of watches make the lugs close to the case and straight lug straps will not fit as the case is in the way.
May suit Tissot Seiko rossini.
You could also put this strap on any watch for a curved lug look (read the following note).

Note: if your watch is a standard type where the lug holes are further back from the case / in the normal position,  you will not decrease the gap by using this strap. Instead the gap, although uniform and curved in reference to the case, will in fact be further away in the centre than a straight lug strap.
Lots of watches for example Rolex, Omega, Seiko 5 etc and especially vintage timepieces originally had steel bracelets that where a close fit to the case. Some leather straps may not fit. A curved watch strap in the instance may be a better fit because there will be more of a gap at the case centre.

Concave lug. Convex.

Curved lug spring bars included -1.5mm diameter (most common – std size)

Leather colour – black, brown, blue.

Polished stainless steel clasp in silver, gold, black or rose gold colour choice.
Lug width – 19mm, 20mm, 21mm, 22mm

Clasp only strap. To fit a buckle or clasps that utilize the tang you would need to cut the buckle prong / tang slot in strap to be able to fit a standard buckle.
Tip: Punch the hole with correct punch or the 1.3mm cutting wheel on a DREMEL tool will work. Measure and mark centre if you are going to attempt this.
You can also contact Rob via support and he will cut the prong slot for you.

Length (*not including your watch)
115mm x 85mm (including buckle)
7 hole / size choices – 6mm between centres
*Add your watch to the above sizes

Thickness (approximate + or – 0.5mm)
5mm tapering to 2.6mm

Clasp sizes
22mm lug – 20mm buckle
21mm lug – check
20mm lug – 18mm buckle
19mm lug – check